Antall besøk:

WHITTLE V8 AERO ENGINE

WHITTLE V8

V8 aero engine. 10.6 cc. overall length 114 mm (4.5 in); width 83 mm (3.25 in)

and height 79 mm (3.125 in) 

According to Eric Whittle, the constructor of this V8 engine,

the engine contains 550 components, over 280 of which are moving parts.

Crankcase With front and rear bearing house.
Tap holder for 12 BA (tap drill 1.05 mm)
Turning of the crankshaft using the Klopfer eccentric chuck.
Finished crankshaft.
Cam follower guides in brass.
Camshaft with 16 cams.
Cam shaft milling fixture.
Lapping of the cylinders.
Mirror finish.
Grinding of the crankshaft
White metal for the bearings of the connecting rods.
Connecting rods with white metal.
Crankshaft with connecting rods.
Drilling valve ports.
Cylinder heads first stage.

Skriv en kommentar: (Klikk her)

123hjemmeside.no
Antall tegn tilbake: 160
OK Sender...
Se alle kommentarer

| Svar

Nyeste kommentarer

15.02 | 16:15

Thank you for the fine compliments. I use a lot of emery paper, rotating steel brush and polishing paste. And many hours of work.

...
15.02 | 11:34

Wonderful job! How are you restoring the brilliant finish on non-painted surfaces such as the spindle nose, handles, dials?

...
13.01 | 06:54

Artikklene i AOH fikk meg til å kjøpe dreiebenk og fres i sin tid.

...
29.12 | 10:50

Hi
That vice is definitely made by schaublin; you can see it on lathes.co.uk if you look at the accessories of the Schaublin 22 milling machine.

...
Jeg liker denne siden
Du liker denne siden
Skriv kommentar