SCHAUBLIN 70

Sometimes it is hard to even imagine the hidden beauty of an old worn machine like this.
My yard on a calm day with almost the right temperature and only a few mosquitos. All machine parts for the Schaublin 70 and 11 A in fresh 2K spray paint.
Main parts fresh in paint.
The bed has visible scraping marks and will later undergo a complete new scraping procedure.
The lathe spindle head is now ready. New precision bearing (on this machine type, only at the front) The quick change lever system is blued and the rest painted.
Cut-off slide.
Mounting faces on the base scraped.
Mounting faces scraped to ensure an exact contact with the base.
Transferring the blue to the lathe bed.
Scraping the top of the lathe bed.
Still a long way to go.
Here I have used a yellow marking color first, and then transferred the blue marking color from the master. The yellow color should be applied in a very thin layer.
32 points per square inch.

Skriv en kommentar: (Klikk her)

123hjemmeside.no
Antall tegn tilbake: 160
OK Sender...
Se alle kommentarer

| Svar

Nyeste kommentarer

15.02 | 16:15

Thank you for the fine compliments. I use a lot of emery paper, rotating steel brush and polishing paste. And many hours of work.

...
15.02 | 11:34

Wonderful job! How are you restoring the brilliant finish on non-painted surfaces such as the spindle nose, handles, dials?

...
13.01 | 06:54

Artikklene i AOH fikk meg til å kjøpe dreiebenk og fres i sin tid.

...
29.12 | 10:50

Hi
That vice is definitely made by schaublin; you can see it on lathes.co.uk if you look at the accessories of the Schaublin 22 milling machine.

...
Du liker denne siden